恒旺供应履带式螺旋打桩机履带底盘打桩效率高工程桩孔机械

恒旺供应履带式螺旋打桩机履带底盘打桩效率高工程桩孔机械

主要特点

打桩速度快，平均3分钟可实现打桩6米深，即3分钟可打一个孔。

用油省，是普通打桩机用油量的一半左右，一年即可为您省下一台打桩机钱。

钻头采用锰钢制造，经过特殊加工处理，适用于各种地质环境。

履带或轮式行走，行走和爬坡能力强。

车架可前后移动，钻头可左右调节，打桩定位准确。

The main features
Pile driving speed, the average 3 minutes can realize piling 6 meters deep, namely a hole three minutes to play.
Oil province, is a common driver USES around half of a year to save the expense of a driver for you.
Bit using manganese steel manufacturing, through special processing, are suitable for all kinds of geological environment.
Tracked or wheeled walking, walking and climbing ability.
, the frame can be moved back and forth around bit can be adjust, piling positioning accuracy.

额定功率Rated power	55KW
额定转速Rated speed	2400r/min
启动电压Start the voltage	24V
*外形尺寸（长宽高）Overall dimensions (length width * height)	*437020104290 mm*
最小离地间隙The minimum clearance from the ground	380mm
履带板宽度Track width	260mm
立杆高度Stud height	4370mm
钻孔直径The hole diameter	130--800mm
最大钻孔深度Maximum drilling depth	3600mm
钻杆转速DPR	71r/min
主泵型号The main pump type	CBG1-F032/032
主泵钻速Main pump drilling rate	2000-2400L/min
主泵压力Main pump pressure	20Mpa
主阀流量The main valve flow	100L/min
液压油箱容积The hydraulic oil tank volume	200L
爬坡度gradability	35°
最大行驶速度Maximum speed	5KW/h